1. Solar Water Heater feature:
2. Reliable, efficient, twin-glass solar tubes
3. Copper heat pipes for rapid heat transfer
4. Easy plug-in installation
5. Maintenance Free
6. Suitable for mains pressure water (up to 8 bar/116psi)
7. Corrosion resistant silver brazed copper header
8. All stainless steel frame (304 2B grade SS)
9. Powder coated (black, brown or silver) aluminium casing
10. Stable solar conversion throughout the day (tubes passively track the sun)
11. The perfect solar collector for domestic solar water heater systems
12. Ideal for commercial solar water heating applictions
How It Works
The operation of the AP solar collector is very simple.
Solar Absorption: Solar radiation is absorbed by the solar tubes and converted into heat.
Solar Heat Transfer: Heat pipes conduct the heat from within the solar tube up to the header pipe.
Solar Energy Storage: Water is ciruclated through the header, via intermittent pump cycling. Each time the water circulates through the header the temperatures is raised by 5-10oC / 9-18oF. Throughout the day, the water in the storage tank is gradually heated.
Exported to 86 nations
| Heat pipe solar collector specification(SPA-C,SPA,SPB) |
| |
SPA-C |
SPA |
SPB |
| Sloping roof photo |
|
|
|
| Flat roof photo |
| Manifold casing material |
Stainless steel 304 |
Aluminum alloy |
Aluminum alloy |
| Manifold size |
130*140 mm |
100*130 or 100*135 mm
|
150*170 mm |
| Aluminum fin |
single long pcs |
single long pcs |
single long pcs |
| Vacuum tube |
Three targets |
Three targets |
Three targets |
| Tube cover |
Screw type |
Screw type |
Screw type |
| Reflector |
excluded |
excluded |
excluded |
| Frame material |
Stainless steel |
Aluminum alloy |
Thickened and dilated Aluminum alloy material |
| Collector Performance Data(SP) |
0.714 |
| Optimal flow rate |
0.1L/min/tube-0.026G/min/tube |
| Max. Test pressure |
9bar |
| Outer copper tube diameter |
22mm |
| Inner copper tube diameter |
20mm |
| Insulation |
140kg/m3 mineral wood |
| Max. Test pressure |
9bar |
| Optimal installation angle |
30-70°vertical, O° horizontal |
Working principle:
1)When the discrepant of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically.
2)The circulation pump makes heat-conducing liquid circulate automatically.
3)The heat-conducting liquid transfers heat to water by heat ehchanger in the water tank.
4)In case the temperature of the water tank dose not reach T max, then start the auxiliary heating device
5)If discrepant temperature of the collector and the water tank does not reach teh set value, the circulation pump shall be shut automatically.
Feature:
1) Collector separates with the storage tank. The tank can be put anywhere of the house.
2) And the collector can be put on both tilted roof and flat roof.
3)Module design, arbitrary combination, harmony with the building perfectly
4)Intelligent control and automatic operation.
5)Anti-freeze: No water inside the tubes when it works
6)The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature.
7)Multifunction: Bathing, washing, domestic heating
8)Workable at anytime and enjoyable.
Our advantages:
Our products process:
){kind=link}