SPA----stainless steel SUS 304 2B for the manifold
SPB----Aluminum alloy for the manifold
1. Borosilicate glass according to ISO3585: 1991; Transmittance of borosilicate glass: 0.92. Absorbance of solar selective absorptive coating: 0.94; Hemispherical emittance: 0.08; Getter according to GB/T9505-1998.
2. Start-up temperature: No more than 25.
3. Start-up time: No longer than 2 minutes under normal sunshine.
4. Low temperature resistance: No breaks at -30.
5. Heat impact resistance: No damage after over 3 time's alternative impact of cold water below 25 and hot water over 90.
6. Pressure resistance: Can withstand 0.6Mpa.
7. Hail resistance: No damage by the impact of 25mm diameter hail.
Model product Size (mm) lighting(m2) Supply hot water(L/) Qty. Per 20' / 40'Container
SPA(B) -47/1500-12 980× 1300× 1215 1.2 70(60) 141 295
SPA(B) -47/1500-15 1190× 1300× 1215 1.5 90(60) 120 240
SPA(B) -47/1500-18 1400× 1300× 1215 1.8 120(60 95 198
SPA(B) -47/1500-20 1540× 1300× 1215 2.0 120(60) 85 178
SPA(B) -47/1500-24 1820× 1300× 1215 2.4 150(60) 71 148
SPA(B) -47/1500-30 2240× 1300× 1215 3.0 180(60) 57 120
SPA(B) -58/1800-12 1090× 1520× 1400 1.99 110(60) 123 258
SPA(B) -58/1800-18 1570× 1520× 1400 2.66 150(60) 82 172
SPA(B) -58/1800-20 1730× 1520× 1400 2.98 175(60) 73 155
SPA(B) -58/1800-24 2050× 1520× 1400 3.56 220(60) 56 118
SPA(B) -58/1800-30 2530× 1520× 1400 4.43 260(60) 45 96
SPA(B) -70/1700-10 SPA1065× 1360× 1265 1.5 120(60) 132 278
SPA(B) -70/1700-20 SPA2015× 1360× 1265 3.1 240(60) 62 122
SPA(B) -70/1700-25 SPA2490× 1360× 1265 4 300(60) 45 96
Heat pipe solar collector specification(SPA-C,SPA,SPB) |
|
SPA-C |
SPA |
SPB |
Sloping roof photo |
|
|
|
Flat roof photo |
Manifold casing material |
Stainless steel 304 |
Aluminum alloy |
Aluminum alloy |
Manifold size |
130*140 mm |
100*130 or 100*135 mm
|
150*170 mm |
Aluminum fin |
single long pcs |
single long pcs |
single long pcs |
Vacuum tube |
Three targets |
Three targets |
Three targets |
Tube cover |
Screw type |
Screw type |
Screw type |
Reflector |
excluded |
excluded |
excluded |
Frame material |
Stainless steel |
Aluminum alloy |
Thickened and dilated Aluminum alloy material |
Collector Performance Data(SP) |
0.714 |
Optimal flow rate |
0.1L/min/tube-0.026G/min/tube |
Max. Test pressure |
9bar |
Outer copper tube diameter |
22mm |
Inner copper tube diameter |
20mm |
Insulation |
140kg/m3 mineral wood |
Max. Test pressure |
9bar |
Optimal installation angle |
30-70°vertical, O° horizontal |
Working principle:
1)When the discrepant of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically.
2)The circulation pump makes heat-conducing liquid circulate automatically.
3)The heat-conducting liquid transfers heat to water by heat ehchanger in the water tank.
4)In case the temperature of the water tank dose not reach T max, then start the auxiliary heating device
5)If discrepant temperature of the collector and the water tank does not reach teh set value, the circulation pump shall be shut automatically.
Feature:
1) Collector separates with the storage tank. The tank can be put anywhere of the house.
2) And the collector can be put on both tilted roof and flat roof.
3)Module design, arbitrary combination, harmony with the building perfectly
4)Intelligent control and automatic operation.
5)Anti-freeze: No water inside the tubes when it works
6)The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature.
7)Multifunction: Bathing, washing, domestic heating
8)Workable at anytime and enjoyable.
Our advantages:
Our products process: