- Model NO.: SPP-H470-H58/1800-20-C
- Structure: Compact Type
- Interior Material: Stainless Steel
- Composition: Tank Insulation
- Trademark: OEM
- Specification: 100L-300L
- HS Code: 84191910
- Max. Capacity: 100-200L
- Pressure: Pressurized
- Collector Components: Glass Vacuum Tube
- Certification: CE, ISO9001, Solar Keymark
- Transport Package: Carton
- Origin: China
Solar heater features
1.Adopts the best conduction performance metal- heat pipe (copper)
2.Can be used all year round in the cold climate
3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly
4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa
5.No water in the tube, one tube broken don't influence the system working
6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage
7.Dual-purpose brackets for both flat and inclined roof
8.The system is pressurized,it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out
Solar heater working principle
1.The solar heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water and hot water,when use, the hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot
3.No water in the heat pipe makes the whole system could bear pressure
Detailed Product Description:
1) Inner tank material: SUS304-2B stainless steel. Available thickness is 1.2-1.5mm.
2) Outer tank material: Color chromed steel or galvanized steel or stainless steel.
Available thickness is 0.5mm.
3) Heat pipe Vacuum tube: 58x1800mm
Material: High borosilicate glass, three-layer coated vacuum tube.
Over 15 years service life. Hail resistance: 25mm.
4) Insulation layer: High density polyurethane foam, available thickness is 50-60mm.
5) Very popular tank capacity in present markets is 150-300L.
6) Frame material: Galvanized steel or aluminum alloy.
|Description||pressure solar water heaters|
|Material of out tank||0.4mm thickness color steel/ fluorine carbon steel|
|Material of inner tank||Food grade1.5mm thickness SUS304 stainless steel|
|Tank insulating layer||55mm 45kg/m³ high-density polyurethane foamed|
|Max pressure||0.6 Mpa|
|Inlet and outlet hole||Male G 1/2,3/4|
|Solar collector tube||3.3 Borosilicate glass with N/Al coating|
|Thickness of glass tube||1.6mm|
|Vacuum tube tightness||P≤0.005 Pa|
|Emission ratio||εh=0.04-0.06 (80C±5C)|
|Idle sunning property parameters||Y=220~260m2.C/KW|
|Average heat loss coefficient||ULT=0.6~0.7W/(m2.C)|
|Bracket:||1.5mm thickness Galvanized Steel|
|Structure of tank||5 holes for air vent,water inlet and outlet, El. Heater and mag. rod|
|Fastening pieces||Made of stainless steel screw|
|Absorber area||1.687 m²|
|Tube quantity||58x1,800mmx18tube with heat pipe|